FarmaDolor : Utilisation de l'appareil

FarmaDolor : Use of the device

Your FarmaDolor is a state of the art device, it complies with the standards in force in the field of medical applications. The user interface has been simplified to a maximum of two buttons: one to turn on, the other to adjust the power.

1. Switching on “”

A short press on the “” key turns the unit on. Pressing the “” will turn it off.

Note: Your device will automatically shut down after 4 minutes of inactivity after being switched on.

2. Choice of power “P”

The selection of the power level is indicated by an indicator light above the “P”.

By pressing the “P”, the corresponding indicator light(s) will light up so that :

• no press: minimum intensity (indicator light no. 1 lights up)
• 1 single press: medium intensity (indicator light no. 2 lights up)
• successive presses: maximum intensity (indicator light no. 3 lights up)
• successive presses: return to minimum intensity (indicator light n° 1 lights up) do not use this power: on the neck, calves, shoulders, forearms.

If the power level seems too high (too much tingling or pain), you should immediately switch back to the lowest power level (light n° 1 on).

Note: The unit pauses for a few seconds during the programme at each frequency change.

3. End of program / Stop in progress

The appliance switches off automatically after about 60 minutes.

Emergency or manual shutdown: press the on/off button “”.

4. Disconnection

Your device is equipped with a sensor that detects if the electrode is disconnected from the skin. In this case, the device stops automatically after 4 minutes of inactivity.