The GlobalStim belt has slots where the electrodes without threads and the modules are clipped on.

Caution: Never use electrodes other than those supplied by SPORT-ELEC®.

To obtain new electrodes, contact your usual retailer or order them from our website www.sport-elec.com

1. Connecting and positioning the belt

• Make sure your device is switched off.
• Unfold the belt.
• On the back of the belt, place the 2 electrodes with snaps through the belt holes.
• On the front, place the GlobalStim modules and connect them to the electrodes through the belt.
• Place the belt around your waist and adjust it with the hook and loop fastener so that the electrodes are in contact with the skin.
• If you feel a tingling sensation, turn off the device and check that the electrodes are in contact with the skin.
• If the problem persists, contact Customer Service.

2.  Starting the programme with the belt

Once you have connected your device, make yourself comfortable and turn on your device by following the "Turning on the device" procedure.

You can carry out your usual activities while using the GlobalStim.

3.  End of programme

• When the programme is finished, switch off the machine and disconnect the belt modules.
• Remove the belt from your waist.
• Detach the electrodes and moisten them slightly with a few drops of water before replacing them on the transparent plastic supports.