Mise en marche de l'appareil

This electrostimulation device is at the cutting edge of technology and complies with the standards in force in the field of medical applications.Abdo Express Max can be used simply with the electrode and its motor, or with the belt to which the electrode and motor are attached.The "man-machine" interface has been simplified to the maximum.

The number displayed on the screen (from 1 to 4) indicates the programme selected by the « P ».

A graduated scale on the left side of the display allows you to see the power level of the engine.

You will also find 4 control buttons:

• 1 "" button (red icon) - short press
• 1 "P" button to select the programme - short press
• 1 pair of "+ / -" buttons to adjust the channel stimulation power.

NB: A long press (1 second) on the "-" key allows you to go to the zero level quickly.

1. On / Off

• A short press on the "" button switches the device on. Each time the device is switched on, it performs a self-test on 11 safety parameters. During the self-test, the display lights up for ½ second.
• If an internal fault is detected, all programme numbers will flash. In this case, switch off your device and send it to your dealer's service centre.
• A long press (longer than 3 seconds) on the "" button will trigger the self-test.

NB: It is possible to stop the self-test in progress by switching off the device (press «»).

2. Choosing a programme « P »

• The programmes are indicated on the right-hand side of the display by numbers from 1 to 4.
• Simply press the "P" button briefly once or several times.

          The display shows the programme numbers 1 to 4 in succession.

          As soon as a programme is selected, the corresponding number is displayed.

• Once the number of the desired programme is displayed, start your session by pressing the "+" button on the box.

3. Course of the program

• The number of the current programme remains lit on the display during the entire programme.
• When a programme is running, the "P" key is inactive.

• However, if you have started a session and wish to change the programme, you must switch the unit off and on again to select another programme.
• There are 64 levels of power settings from 0 to 64.

          - Segments from 0 to 8: there are 6 power levels, i.e. 6 successive presses on the "+" button to display the next segment.

          - Segments from 8 to 10: there are 7 power levels, i.e. 7 successive presses of the " + " button to display the next segment.

4. End of program - Stop during program

• At the end of the programme, the appliance stops automatically.
• To stop the appliance during the programme, set both power levels to zero ("-" button), or press the "" button.
• Emergency stop: press the " " button.

5. Disconnection

Your device is equipped with an electrode disconnection detector.

If there is no contact between the electrode and the human body, the current flow is interrupted.

You are warned of a disconnection by the flashing of the first bar of the bar graph.

6. Checking the battery status

Low battery level: Bar 6 flashes on the bar graph.

Critical battery level: bar 10 flashes on the bar graph and then the unit switches off.

Replace the used batteries. Please insert good quality batteries. Using medium quality batteries may cause the unit to trip or malfunction.