1. Introduction

You have just purchased a product designed and manufactured by SPORT-ELEC ®. We thank you for your purchase and invite you to read the instructions for use in this manual.
SPORT-ELEC® has been designing, manufacturing and distributing electro-musculation equipment for the general public and professionals for over 20 years.
Resulting from the latest innovations of the Sport-Elec research department, the MAXIBELT allows you to work the abdominal muscles in a precise manner, by activating the 2 motors or channels separately.
Each abdominal muscle will be solicited at the ideal power to develop and firm it up.
For this muscular development you will benefit from the maximum power of the device, i.e. 100 mA.
The Maxibelt offers you a workout that is 4 times more effective than an ordinary belt, a generator.
The results on your abdominal muscles will be very fast. The first effects can be seen within a few days.

The Maxibelt is compatible with the devices of the Sport-Elec range:

• GlobalStim
• Body Beautiful

2. Content of the pack

3. Use

A. Position the 2 large electrodes inside the accessory

Position the large electrodes in the red frames

B. Pass the electrode wires to the outside of the accessory

Pass the wires through the cross slot of the accessory

C. Clip the electrodes to the snaps of the accessory

Connect each large electrode on the outside of the accessory to the snap button surrounded by a white circle

D. Position the 4 small electrodes inside the accessory

Connect the small electrodes in the white frames

E. Pass the wires to the outside of the accessory through the cross slot

F. Clip the electrodes onto the nearest free snaps

G. Connect the 2 generators of your electro-musculation device to the accessory

Clip the 2 generators on the external face of the accessory

H. Remove the plastic film from the electrodes and moisten them slightly with a little water

Moisten the electrodes to improve current conduction and comfort
Keep the plastic films to replace them on the electrodes after the session

I. Position the electrodes against your abdominal muscles

Scrape the belt in the back

J. Starting up your electro-musculation device and choosing your program

Please refer to the user's manual of your device to choose the right program for you

4. Technical specifications

A. The accessories

Material: black polyester jersey fabric with velcro
Connections: snaps

B. The electrodes

Material: conductive hydrogel with velcro strips on the outside
Connections: wired with snap

5. Maintenance and cleaning tips

A. The accessories

• Once your session is over and your generator is unplugged from the accessory, use a damp sponge or dry cloth to clean the fabric if needed.
• Do not machine wash, do not dry clean, do not immerse in water, do not use bleach.

B. The electrodes

• At the end of your session, put the plastic film back on the electrodes.
• To extend the life of the adhesive electrodes, remove them from the accessory and store them in a dry place away from light. Some users recommend storing the adhesive electrodes in a cool, dry place.

6. Precautions and contraindications

• Follow the precautions and contraindications of the electro-musculation device to which you will connect your Maxibelt
• DO NOT USE ON THE HEART AREA OR GENITALS
• DO NOT USE IF YOU ARE PREGNANT
• DO NOT USE IF YOU HAVE HEART PROBLEMS OR A PACEMAKER

7. Security control

Every 24 months, the following items should be checked:
A. Check for surface degradation of the material
B. Check the reliability of the accessories

• No tears
• No material defects

8. Warranty

The accessories, including the Maxibelt, are intended for personal use. For reasons of hygiene, they cannot be returned or exchanged.

9. Recommendations                                              

When disposing of your device at the end of its life, please ensure that you comply with national regulations.
Please dispose of it in a safe and environmentally friendly manner.

10. Environmental conditions for transport and storage

• Environmental temperature between +10°C and +40°C
• Relative humidity between 30% and 75%.
• Pressure 700 hPa.

Download the Maxibelt 2 instructions for use here