Ceinture abdominale classique

Using the device with the belt

The belt has 2 pairs of snap fasteners on which 2 wireless electrodes specially designed by SPORT-ELEC® are clipped.
To obtain new electrodes, contact your usual retailer or order them at www.sport-elec.com.
Caution!

Never use the belt without attaching the 2 electrodes provided. Never use electrodes other than those supplied by SPORT-ELEC ®.

Connection and positioning of the belt

→ Unfold the belt. Make sure your device is turned off.
→ Attach the 2 modules to the pressure clips on the outside of the belt and connect the cables to the box.
→ Attach the electrodes to the inside of the belt using the snap fasteners. Remove the plastic holder from the electrodes.
→ Place the belt around the waist and adjust it with the hook-and-loop part, so that the electrodes are in good contact with the skin.
→ Turn on the device and select a program.
→ Turn up the power of each channel. Sit back and enjoy your electrostimulation session.
→ If you feel any tingling, turn off the device and check that the electrode is in good contact with the skin.

End of the program

→ When the program is finished, turn off the device and then disconnect the device from the belt.
→ Detach the electrodes, and moisten them slightly with a few drops of water before replacing them on their transparent plastic supports.