Use                                                            

1. Position the 2 large electrodes inside the accessory                 

Position the large electrodes in the red frames

2. Run the electrode wires to the outside of the accessory                           

Pass the wires through the cross slot of the accessory

3. Clip the electrodes to the snaps on the accessory

Connect each large electrode on the outside of the accessory to the push button surrounded by a white circle

4. Place the 4 small electrodes inside the accessory                     

Connect the small electrodes in the white frames

4. Pass the wires to the outside of the accessory through the cross slot               

6. Clip the electrodes onto the nearest free snaps      

7. Connect the 2 generators of your electro-musculation device to the accessory

Clip the 2 generators onto the outside of the accessory

8. Remove the plastic film from the electrodes and moisten them slightly with a little water

Moisten the electrodes to improve current conduction and comfort
Keep the plastic films to replace them on the electrodes after the session

9. Position the electrodes against your abdominal muscles                           

Scrape the belt in the back

10. Starting up your electro-musculation machine and choosing your programme

Please refer to the user manual of your appliance to choose the right programme for you